ISO 81176 thrust roller bearings

H:117 mm; N:29mm; H1:102 mm; s1:24.6 mm; Designation of bearing:UC209-26G2T04; S:19 mm; P:300 mm; A1:16 mm; Recommended tightening torque for set screw:8 Nm; N2:49 mm;

B:16 mm; Dynamic load, C:17.9 kN; Nlim (grease):12,000 rpm; Static load, C0:9.75 kN; Radial clearance class:CN; Characteristic cage frequency, FTF:0.39 Hz; D:58 mm; ra max:1 mm; d:28 mm; Fatigue limit load, Cu:0.44 kN;

J:159 mm; H1:22 mm; S:11 mm; T max.:200 °C; Weight:3.03 kg; H:57.2 mm; G:M6x1; d1:67.2 mm; s1:33.4 mm; N:20mm;

H2:51 mm; Weight:0.85 kg; Recommended tightening torque for set screw:5.5 Nm; A2:21 mm; H:89 mm; N:19mm; G:M6x1; C0:6.65 kN; s1:30.5 mm; S:17 mm;

C:9.55 kN; L:60 mm; Recommended tightening torque for set screw:5.5 Nm; Weight:0.34 kg; Designation of bearing:ES201G2; s1:23 mm; A:25.5 mm; B:19 mm; A1:12 mm; S:6.5 mm;

S:19 mm; A2:52.2 mm; H:180 mm; N:17.5mm; C:25.7 kN; T min.:-20 °C; J:148 mm; C0:20.8 kN; s1:24.6 mm; Recommended tightening torque for set screw:8.3 Nm;

Designation of open end cover:SCOU209-26; G:M6x1; S:19 mm; H2:108 mm; L:190 mm; Weight:2.55 kg; B:49.2 mm; Designation of closed end cover:SCC209; s1:24.6 mm; H:54 mm;

H:42.9 mm; L1:47 mm; B:38.1 mm; d:31.75 mm; Weight:1.1 kg; N:14mm; L:158 mm; A:40 mm; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN;

B:28 mm; Static load, C0:64 kN; Characteristic rolling element frequency, BSF:5.78 Hz; da min:94 mm; Min operating temperature, Tmin:-20 °C; Da max:141 mm; Nlim (grease):4,200 rpm; Characteristic cage frequency, FTF:0.42 Hz; D:150 mm; Dynamic load, C:83.5 kN;

Designation of open end cover:SCO206-30; H1:13 mm; Designation of housing:PA206N-; A1:25 mm; Dz:70 mm; H:42.9 mm; C:19.5 kN; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; S:15.9 mm;

L:108 mm; Recommended tightening torque for set screw:3.7 Nm; B:30 mm; Weight:1.04 kg; A1:12 mm; e:20 mm; C0:11.2 kN; d:31.75 mm; J:82.5 mm; A2:42 mm;

d:120 mm; Da max:189 mm; Y1:2.43; Min operating temperature, Tmin:-40 °C; D:200 mm; k:4.5 mm; Nref:2,600 rpm; Y0:2.37; Dynamic load, C:663 kN; Associated sleeve reference:H3124;

Weight:2.7 kg; Designation of closed end cover:SCC210; s1:21.75 mm; B:43.5 mm; H:55.6 mm; Recommended tightening torque for set screw:8 Nm; H1:19.3 mm; Designation of bearing:US210-31G2T04; T max.:100 °C; N1:27 mm;

Recommended tightening torque for set screw:27.1 Nm; Designation of housing:F214-; d:69.85 mm; A2:75.4 mm; C0:45 kN; A:54 mm; e:31 mm; J:152 mm; G:M10x1; s1:37.3 mm;

Housing Coating:Powder Coat; Ball Bearing Housing Series:207 Series; End Cap Groove:No; Bearing Locking Device:Setscrew; Base to Center Height:Not Applicable; Housing Material:Cast Iron; Bearing Duty:Normal Duty; Bearing Family:Setscrew Ball Bearin; Seal Type:Single Lip; Anti-Rotation Pin:Yes;