IKO PHSA 14 plain bearings

H1:152.4 mm; H2:60.325 mm; Taconite seal (dc shaft position):TER 127; P180°:127 kN; Mass pillow block:85.3 kg; Cap bolt, SAE grade:8; P90°:180 kN; Taconite seal (db shaft position):TER 144; P60°:301 kN; Stabilizing ring:SR-28-0;

a:43 mm; rs (min):1.5 mm; Pu:1.836 kN; B:25 mm; Static (Cor):40.386 kN; D:100 mm; Grease:5 600 min-1; Dynamic (Cr):64.305 kN; r1s (min):1 mm; d:45 mm;

ra max.:1 mm; r1,2 min.:1.5 mm; Mass bearing (including seat washer where applicable):3.8 kg; D3:135 mm; H:54 mm; Minimum load factor A:0.96; C:16 mm; D1 ≈:62 mm; Basic static load rating C0:430 kN; Da max.:95 mm;

G:Tr 710x7; d1:630 mm; Hydraulic nut:HMV 142 E; Nut for removal:HM 31/710; B1:348 mm; G1:40 mm; Mass withdrawal sleeve:141 kg; A:12 mm; d:670 mm; G2:G 1/4;

Static (Cor):22.3 mm; with cylindrical bore:500 min-1; B:133 mm; with tapered bore:600 min-1; D:520 mm; Oil:338.560 kN; Grease:4330 kN; Pu:2320 kN; d:340 mm; Dynamic (Cr):12 mm;

da min.:356 mm; B:118 mm; Fatigue load limit Pu:390 kN; d1 ≈:385 mm; ra max.:2.5 mm; Basic dynamic load rating C:1790 kN; Calculation factor kr:0.25; Reference speed:560 r/min; Mass bearing:57.8 kg; s max.:6 mm;

D:130.0000 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; Basic Static Radial Load Rating Co:52000 N; Basic Dynamic Radial Load Rating C:87100 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3700 rpm; B:31.00 mm; Accessories:Two Seals & Snap-Rin; Grease Speed Rating Open/Shielded n1:5200 rpm; d

H2:20.637 mm; Bearing limiting speed:10000 r/min; N1:15.875 mm; da:34.925 mm; ba:24.606 mm; Adapter sleeve assembly:SNW 9x1.3/8; H:112.713 mm; P60°:20.9 kN; P120°:7.56 kN; Stabilizing ring:SR-9-9;

D:670 mm; Da max.:606 mm; Limiting speed:700 r/min; r1,2 min.:3 mm; D1 ≈:564 mm; H:85 mm; ra max.:2.5 mm; Fatigue load limit Pu:68 kN; Mass bearing (including seat washer where applicable):61 kg; Basic static load rating C0:4650 kN;

Basic dynamic load rating C:1460 kN; r1,2 min.:2.1 mm; Basic static load rating C0:8500 kN; B:24 mm; D1:464 mm; Limiting speed:600 r/min; Mass bearing:41 kg; D:560 mm; d:460 mm; ra max.:2 mm;

r2 max.:0.8 mm; Dw:3 mm; r1,2 min.:0.2 mm; Lw:21.8 mm; r1 max.:0.6 mm; Mass needle roller:1.21 g;

G:219.151 mm; Lock washer:W 044; d1:200.025 mm; Sleeve:S 3044x7.7/8; d3 max.:260.477 mm; d:220 mm; Lock nut:N 044; Threads per inch:8; B1:130.048 mm; B:32.004 mm;

Basic Interchange FAF:205KLL2; Width - Inner Ring B1:16.70 mm; Speed Rating-Single and Double Sealed Grease SDG:8500 rpm; Basic Radial Load Rating-Dynamic DC:14000 N; d:25.000 mm; Basic Interchange BCA:88505; Width - Outer Ring B0:15.0 mm; Old MRC Bearing Number:205FFS; Basic Interchange NDH:88505;

Mass bearing unit:0.96 kg; N1:14.5 mm; J min.:129 mm; H2:19 mm; Bearing:YAR 208-108-2RF/VE49; d:38.1 mm; Recommended diameter for attachment bolts, mm G:12 mm; Housing:SYWK 508 Y; Limiting speed:2800 r/min; Fatigue load limit Pu:0.8 kN;